COMPLIANCE INFO 2006-2015 - Laserfiche WebLink

Home Browse Search

WWSWRCB,January 2002 l Page of 6. PIPING SUMP TESTING Test Method Developed By: Sump Manufacturer hidustry Standard X Professional Engineer Other(Specii,6) Test Method Used: Pressure Vacuum X Hydrostatic Other(Specify) Test EquipmeptIIsed: Caldwell Systems Equipment Resolution: .005/30 min Sump# 1 Sump#2 Sump# Sump Sump Diameter: 48" 42" Sump Depth: 36" 48" Sump Material: Fiberglass Fiberglass Height from Tank,Top to Top of 22„ 42" Highest Piping Penetration: Height from Tank Top to Lowest 6„ 40" Electrical Penetration: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 2"above Highest piping penetration Does turbine shut down when sump sensor detects liquid(both Yes No x NA Yes No x NA Yes No NA Yes No NA product and water)?' Turbine shutdown response time Is system programmed for fail-safe yes No x NA Yes No x NA Yes No NA Yes No NA shutdown?' Was fail-safe verified to be Yes x No NA Yes x No NA Yes No NA Yes No NA operational?' Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 11:55 Initial Reading(Ri): .00" .00" .00" .00" Test End Time: 12:25 Final Reading(RF): .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-Rt): 00 Pass/Fail Threshold or Criteria: .005/30 min 005/30 min .005/30 min .005/30 min Test Result: x Pass 0 Fail 0 Pass x Fail 0 Pass 0 Fail 0 Pass 0 Fail Was sensor removed for testing? x Yes No NA x Yes No NA x Yes No NA Yes No NA Was sensor properly replaced and x Yes No NA x Yes No NA x Yes No NA Yes No NA verified functional after testing? Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) Unable to test sump 2 at the load rack torn penetration fittings and test reducers. If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*) is"NO" or"NA",the entire sump must be tested. (See SWRCB LG-160)