COMPLIANCE INFO 2006-2015 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 • • Page_of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Systems Equipment Resolution: .005/30 min Sump#1 (at rack) Sump# 1 Sump# Sump# Sump Diameter: 38" 48" Sump Depth: 51" 34" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 41„ 26" Highest Piping Penetration: Height from Tank Top to Lowest 40„ 16" Electrical Penetration: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 2"above Highest piping penetration Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No x NA ❑Yes ❑No x NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA product and water)?* Turbine shutdown response time Issystem p�ogtammed for fail-safe x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown? Was fail-safe verified to be ❑Yes x No ❑NA ❑Yes x No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA o erational?* Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 9:22 10:30 Initial Reading(111): .00" .00" .00" .00" Test End Time: 9:52 11:00 Final Reading(RF): .00 .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-Ri): .00 .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result: x Pass ❑Fait x Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments— include to ormation on repairs made prior to testing, and recommended follow-u for failed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)