INSTALL_1990 - Laserfiche WebLink

Home Browse Search

Site Preparation and II illation Manual TI&250i Tank Level Sealing System ATTENTION INSTALLER: WARNINGS: W) ; EXPLOSION COULD OCCUR IF OTHER WIRES READ THIS IMPORTANT SAFETY SHARE TLS-2601 PROBE AND SENSOR WIRE INFORMATION CONDUIT'S OR WIRING TROUGHS.CONDUITS BEFORE BEGINNING WORK AND WIRING TROUGHS FROM PROBES AND SENSORS TO THE MONITOR MUST NOT CON- TAIN ANY OTHER WIRES. This product is to be installed and operated in the IMPROPER SYSTEM OPERATION COULD RF.- highly combustible environment of a gasoline storage SULTIN INACCURATE INVENTORY CONTROL tank.U is essential that you carefully read and follow the OR UNDETECTED POTENTIAL ENVIRONMEN- warnings and instructions in this manual to protect TAI.AND HEALTH HAZARDS IF PROBE-AND yourself and others from serious injury, explosion, or SENSOR-TO-MONITOR WIRE. RUNS EXCEED electrical shock. 1,000 FEET.RUNS OVER 1,000 FEETARE NOT UL APPROVED FOR THIS APPLICATION. For safety reasons, we have taken particular care in PROBE- AND SENSOR-TO-MONITOR WIRES the design of this product to limit the power in the wiring MUST NOT EXCEED 1,000 FEET. to the fuel tanks and to keep that wiring physically separated from anyotherwiring.It is your responsibility EXPLOSION AND/OR EQUIPMENT DAMAGE to maintain the effectiveness of these safety features by COULD OCCUR IF CONDUITS DO NOT ENTER installing this product in accordance with the instruc- THE MONITOR THROUGH THEIR DESIGNAT- tions and warnings which follow. Your failure to do so ED PREFORMED KNOCKOUTS. could create danger to life and property. EXPLOSION COULD OCCUR IFTHE MONITOR IN INSTALLED IN A VOLATILE,, COMBUST[. Leaking underground tanks can create serious envi- ISLE.OR EXPLOSIVE (CLASS I, DIVISION 1 OR ronmental and health hazards.It isyour responsibilityto DIVISION II)ATMOSPHERE.DONOTINSTALL install this product in accordance with the instructions MONITOR IN A VOLATILE,COMBUSTIBLE OR and warnings found in this manual. EXPLOSIVE ATMOSPHERE. IN INSTALLATION OF THIS PRODUCT, COM- Failure to install this product in accordance with the PLY WITHTHENATIONAL ELECTRICAL CODE; instructions and warnings found in this manual will FEDERAL, STATE AND LOCAL CODES; AND � 1 result in voiding of all warranties connected with this OTHER APPLICABLE SAFETY CODES. j product (see Section 7). TO AVOID ELECTRICAL SHOCK WHICH COULD NOTE: THE INSTALLER OF THIS PRODUCT SHOULD KILLYOU,BE SURE AC POWERTOTHE MONI. TOR IS OFF DURING INSTALLATION. REMOVE THE FRONT PANEL KEY AND PRESENT IT TO AN AUTHORIZED USER TO PREVENT MIS- CAREFULLY READ THE INSTALLATION IN- USE OF THE PRODUCT. STRUCTIONS AND WARNINGS FOUND IN THIS MANUAL.FAILURE TO DO SO COULD RESULT IN UNDETECTED POTENTIA[.ENVIRONMEN- TAL AND HEALTH HAZARDS. FAILURE TO COMPLY WITH THESE REQUIRE- MENTS COULD RESULT IN DEATH,SERIOUS PERSONAL INJURY, PROPERTY LOSS, OR EQUIPMENT DAMAGE AND UNDETECTED PO- TENTIAL ENVIRONMENAL AND HEALTH HA- ZARDS. WARNING: SUBSTITUTION OF COMPONENTS MAY IM- PAIR INTRINSIC SAFETY. CIRCUITRY WITHIN THE PROBE, SENSOR AND CONSOLE BARRIER FORM AN INTRIN- SICALLY SAFE, ENERGY-LIMITED SYSTEM. THIS SYSTEM MAKES THE TIS PROBE AND SENSOR INTRINSICALLY SAFE FOR USE IN A CLASS 1, GROUP D HAZARDOUS LOCATION. THE TLS-2501 PROBE AND SENSOR WIRING IS INTRINSICALLY SAFE ONLY WHEN CONNEC. TED TO VEEDER-ROOTS MONITOR FO$M NUMBER 7941.