COMPLIANCE INFO 2010 - 2011 - Laserfiche WebLink

Home Browse Search

YRC Inc. 1535 East Pescadero Ave, Tracy, CA 95376 SR0061778 4. Contact Thuy Tran at (209) 468-8257 to arrange the following inspection appointments (a 48-hour notice is required for inspection appointments). Please be aware that inspections for emergency work must be scheduled within five days of permit approval. a. Annular sensor functionality for T-4 gear oil, T-5 motor oil and T-6 waste oil tanks: Functionality of the monitoring system must be verified to ensure that monitoring has been restored to meet the requirements of Title 23 California Code of Regulations and the Health & Safety Code. i. Functionality for T-5 motor oil annular sensor- completed on 02/28/11. ii. Functionality for T-4 gear oil annular sensor- completed on 03/09/11. iii. Functionality for T-6 waste oil annular sensor b. Verify position placement of sensors: ensure the monitoring equipment is capable of detecting a leak at the earliest possible opportunity. i. Placement of T-5 motor oil annular sensor- completed on 02/28/11. ii. Placement of T-3 antifreeze annular sensor, T-4 gear oil annular sensor, L-2 diesel sump and L-14 waste oil sump sensor- completed on 03/09/11. iii. Placement of T-6 waste oil annular sensor c. Verify corrosion protection prior to backfill: i. T-4 gear oil annular riser— completed on 02/28/11. ii. T-6 waste oil annular riser, direct bury spill bucket riser and vapor riser d. Secondary containment testing on T-4 gear oil tank, T-6 waste oil tank, their piping and other affected piping. i. T-4 gear oil tank and sump — completed on 03/09/11 ii. T-6 waste oil tank and other associated piping e. Spill bucket test: Verify minimum 5-gallon capacity on T-6 waste oil bucket and pass a one hour hydrostatic test (or equivalent). Proper drainage must also be verified. f. Verify external audio and visual alarms will activate when tanks are 90% full and ball floats are already installed for all tanks g. Overfill prevention verification: i. Measurement of T-6 waste oil drop tube to verify 95% tank volume shut off if needed Please be aware that the facility cannot operate the T-6 waste oil tank prior to the EHD inspection and approval. - Approved to operate T-5 motor oil tank on 02/28/11. - Approved to operate T-4 motor oil tank on 03/09/11. 5. Since concrete will be broken near the waste oil tank and its piping, a secondary containment test must be performed on both the waste oil tank, its piping and any other pipings in the vicinity once concrete is poured in accordance with the manufacturer's guidelines. 6. Qualified service technicians must possess or work under the direct and personal supervision of an individual physically present at the work site who possesses all of the following: a. One of several permissible valid, current contractor's licenses issued by the Contractors State License Board (may be issued to the installation company), or a Tank Tester's license issued to the individual by the State Water Board, and b. A valid, current California UST Service Technician certificate issued by the International Code Council (ICC), and 2