INSTALL_2006 - Laserfiche WebLink

Home Browse Search

• -7- Dispenser Interface Module (DIM) Existing Dispenser Interface Modules or DIM communication cards are used to interface to the dispenser Point Of Sale (POS) or controller system to gather fuel transaction data. The ISD Operability Test Procedure provided in Exhibit 9 and in Section 4 of the Veeder-Root ISD Install, Setup and Operation Manual can be used to verify the proper selection and setup of the Dispenser Interface Module. See Figure 213-14 for a typical Dispenser Illustration. Tank Inventory Probe Sensor Existing Tank Inventory Probe sensors (one per tank) are used to measure the amount of vapor space in the Underground Storage Tanks (USTs). The ISD Operability Test Procedure can be used to verify the proper selection and setup of the Tank Inventory Probes. See Figure 213-15 for a typical Tank Inventory Probe Sensor. Shutdown Control The TLS Console must be wired per the Veeder-Root ISD Install, Setup and Operation Manual 557013-800, Rev. E of the ARB Approved Installation, Operation and Maintenance Manual for the Healy Phase II EVR System Including the Veeder- Root ISD System such that it shall automatically prohibit the dispensing of fuel through shutdown of all the gasoline turbine pumps during a CP-201 ISD failure alarm or TLS Console ISD system power loss. TLS Console Modules The ISD Operability Test Procedure in Exhibit 9 and in section 4 of the Veeder-Root ISD Install, Setup, and Operation Manual of the ARB Approved Installation, Operation, and Maintenance Manual for the Healy Phase 11 EVR System Including Veeder-Root ISD System shall be used to verify the proper selection and setup of the TLS Console Modules. Training Program All Veeder-Root contractors must successfully complete a Veeder-Root training program before they can startup and service TLS Console equipment. Contractors must have taken and passed the Veeder-Root ISD course and must have an up-to-date Level 1 certification to install the TLS Console ISD system. Contractors must have taken and passed the Veeder-Root ISD course and must have an up-to-date Level 2, 3 or 4 certification to startup the ISD system. The schedule, fee and registration information for the ASC training program can be found at http://www.veeder.com. To confirm TLS or ISD training a regulator should call 800-997-7725 and press " ', to get to the Veeder-Root menu and "*" again to speak to a representative. Healy Phase 11 EVR System Including Veeder-Root ISD, Exhibit 2—VR-202-A