Laserfiche WebLink
Bulletin No.B2106 <br /> • • <br /> July 15,1995 <br /> GENERAL SPECIFICATIONS <br /> SMl�li <br /> UL Listed RED THREAD° IIA <br /> Secondary Containment Piping <br /> SCOPE 3"-5" FITTINGS - Compression molded two- <br /> piece fittings shall be manufactured using a <br /> PIPE-Pipe shall be manufactured by Smith vinyl ester molding compound. The molding <br /> Fiberglass Products Inc. by a filament winding compound shall be reinforced with a mini- <br /> process using a thermosetting epoxy resin to mum of 60% chopped glass fiber. <br /> impregnate strands of continuous glass fila- <br /> ments which are wound around a mandrel at a ADHESIVES -Adhesive and curing agents shall <br /> prescribed helix angle and under controlled be either UL Listed DS-7000 or DS-8000 series <br /> tension. adhesives and filler. Consult Smith Fiberglass <br /> Products' installation manual No. B2160 for <br /> CONSTRUCTION recommended heat curing techniques. <br /> 3"-5" PIPE - RED THREAD IIA pipe shall have JOINING TECHNIQUES <br /> continuous glass fibers filament wound at a <br /> 35Y° helix angle in a matrix of epoxy resin. 3"-5" PIPE and FITTINGS - Pipe shall be joined <br /> Pipe shall be in compliance with ASTM D2310 with either DS-7000 or DS-8000 series adhe- <br /> and classified by its designation code. Pipe sives. Fittings shall be joined with either DS- <br /> shall meet all performance requirements and 7000 or DS-8000 series adhesives and filler. <br /> mechanical properties, and shall be classified Material to be installed in accordance with <br /> with the following designation codes: Smith Fiberglass Products' installation manual <br /> No. B2160. <br /> Size Designation Code at 73.4° F <br /> 3" RTRP-11 AE TESTING <br /> 4"-5" RTRP-11AF <br /> 3"-5" SECONDARY CONTAINMENT PIPE SYS- <br /> ITEMS TEMS -Secondary containment pipe systems <br /> should be tested prior to use to assure sound- <br /> 3%5" PIPE -Glass fiber reinforced filament ness of all joints and connections. Consult <br /> wound pipe with Plain end by Plain end. Smith Fiberglass Products' installation manual <br /> Pipe to be factory prooftested at the following No. B2160. <br /> pressures: <br /> 3" - 300 psig (minimum) <br /> 4"-5" - 265 psig (minimum) <br /> ISO 9001 <br /> MEMaEa <br /> A1777UjL A3477 CPEI <br /> Little Rock,AR Wichita.KS <br /> wool <br /> 8 and" Trademarks of Smith Fiberglass Products Inc. OCopyright 1993 Smith Fiberglass Products Inc. <br /> PRINTED IN U.S.A.,7.5M795 SMITH FIBERGLASS PRODUCTS INC.•A SUBSIDIARY OF A.O.SMITH CORPORATION <br /> 2700 W.65TH ST.,LITTLE ROCK,AR 72209-8592•501-568-4010• FAX 501-568-4465 <br />