Laserfiche WebLink
i • Bulletin No.B2107 <br /> July 15,1995 <br /> GENERAL SPECIFICATIONS <br /> SMITH <br /> UL Listed RED THREAD° IIA Piping <br /> SCOPE 2"4" FITTINGS — Compression molded fittings <br /> shall be manufactured using an epoxy mold- <br /> PIPE— Pipe shall be manufactured by Smith ing compound. The molding compound shall <br /> Fiberglass Products Inc. by a filament winding be reinforced with a minimum of 45% <br /> process using a thermosetting epoxy resin to chopped glass fiber. In-line fittings are fila- <br /> impregnate strands of continuous glass fila- ment wound. <br /> ments which are wound around a mandrel at a <br /> prescribed helix angle and under controlled ADHESIVES —Adhesive and curing agents shall <br /> tension. All pipe will be supplied with match- be UL Listed DS-8000 series adhesives. <br /> ing tapered T.A.B.Tm (Threaded and Bonded) Consult Smith Fiberglass Products' installation <br /> coupling and spigot ends or T.A.B. spigot x manual No. B2160 for recommended heat cur- <br /> spigot ends. ing techniques. <br /> CONSTRUCTION JOINING TECHNIQUES <br /> 2"-4" PIPE — RED THREAD IIA pipe shall have 2"-4" PIPE and FITTINGS—Pipe and fittings <br /> continuous glass fibers filament wound at a shall be joined with DS-8000 series adhesive <br /> 35'/<° helix angle in a matrix of epoxy resin. using matching tapered bell/coupling and <br /> (` \ Pipe shall be in compliance with ASTM D2310 spigot. Material to be installed in accordance <br /> and classified by its designation code. Pipe with Smith Fiberglass Products' installation <br /> shall meet all dimensional and performance manual No. B2160. <br /> requirements, mechanical properties, and shall <br /> be classified with the following designation TESTING <br /> codes: <br /> 2"-4" PRIMARY PIPE SYSTEMS —Primary pipe <br /> Size Designation Code at 73.4' F systems should be tested prior to use to assure <br /> 211-3" RTRP-11 AE soundness of all joints and connections. <br /> 4" RTRP-11 AF Consult Smith Fiberglass Products' installation <br /> manual No. B2160. <br /> ITEMS <br /> 2"4" PIPE — Glass fiber reinforced filament <br /> wound pipe with matching tapered T.A.B. <br /> (Threaded and Bonded) coupling and spigot <br /> ends. Pipe to be factory prooftested at the fol- <br /> lowing pressures: <br /> 2" - 375 psig <br /> 3" - 300 psig <br /> 4" - 265 psig 1509001 <br /> MEY9FR <br /> A1777 � UL A3477 PEI <br /> Little Rock,AR WlchltR,KS <br /> RREn. <br /> ®and-Trademarks of Smith Fiberglass Products Inc. OCopyright 1993 Smith Fiberglass Products Inc. <br /> PRINTED IN U.S.A.,7,5M795 SMITH FIBERGLASS PRODUCTS INC.•A SUBSIDIARY OF A.O.SMITH CORPORATION <br /> 2700 W.65TH ST.,LITTLE ROCK,AR 72209-8592 R 501-568-4010-FAX 501-56BA465 <br />