COMPLIANCE INFO_2016 - PRESENT - Laserfiche WebLink

Home Browse Search

.e . { SWRCB, January 2002 Rage of 6- PIPING SITMP TESTING Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum t.. - - X Hydrostatic ❑ Other (Spec) Test Equipment Used: Caldwell Level Change Indicator Sump # 1 -Diesel Sump # 2-91 Equipment Resolution: .002 Sump # 3-87 Sump # Sump Diameter: 42" 42" 42" Sump Depth: 53" 52 '/2" 52 %" Sump Material: Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of Highest Piping Penetration: 14" 14" 13" Height from Tank Top to Lowest Electrical Penetration: 20" 21" 20" Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested' Water Level 25" Water Level 27" Water Level 22" Does turbine shut down when sump sensor detects liquid (both product and water)?* Yes Yes Yes Turbine shutdown response time Not Alarmed Not Alarmed Not Alarmed Is system programmed for fail-safe shutdown?' Yes Yes Yes Was fail-safe verified to be operational?* No No No Wait time between applying water and starting test: 5 Minutes 5 Minutes 5 Minutes Test Start Time: 9:37 9:42 10:27 Initial Reading (Ri): .001 .001 .001 Test End Time: 10:07 10:12 10:57 Final Reading (RF): .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes Change in Reading (RF-Ri): 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes Test Result: Pass Pass Pass Was sensor removed for testing? Yes Yes Yes Was sensor properly replaced and verified functional after testin ? Yes Yes Yes Comments —(include information on repairs made prior to testing and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)