Laserfiche WebLink
2" (50.8 mm) TEST button <br />(on side) <br />9.313" (8 mm) dia. <br />4 holes .. <br />Hinge <br />side <br />6.75" <br />(171,5 mm) <br />(25.4 mm) <br />consolomacksvf.aps <br />t=l <br /><2" (50.8 mm)' <br />4.3" (109.5 mm) <br />3" (76.2 mm) <br />1/2 " <br />conduit <br />connector <br />14 " <br />(35.6 mm) <br />* <br />ACKNOWLEDGE <br />RESET <br />Mounting Instructiols <br />Figure 2. Acknowledgement Switch mounting dimension <br />Mounting Instructions <br />OVERFILL ALARM <br />I. Select a mounting location where the Overfill Alarm can be seen and heard clearly from the area where the fuel tank <br />are filled. In addition, consider the ease of routing interconnection conduit. <br />2. Locate and mark mounting holes using the hole pattern in Figure 1. <br />3. Mount the Overfill Alarm using the four mounting tabs on the housing. <br />ACKNOWLEDGEMENT SWITCH <br />1. Select a mounting location where the Acknowledgement Switch can he easily activated by the tank truck driver. In <br />addition, consider the ease of routing interconnection conduit. <br />2. Locate and mark mounting holes using the hole pattern in Figure 2. <br />3. Mount the Acknowledgement Switch using the four mounting tabs on the housing. <br />4. Install conduit between the Acknowledgement Switch, Overfill Alarm, and TLS Console. <br />Overfill Alarm/Ack Switch Installation Guide <br />X0wara-,-",i24,221961-36$73Wera-ta:?0W,^5 :1,74.kiPternffri4,7,-14-77-47.214.77777,777- 7-7 <br />4 PAGE 106