Laserfiche WebLink
Concrete <br />, pad - <br />Double wall <br />sump <br />Coupling and <br />seals as required <br />for conduit egress <br />(customer supplied) 4 <br />NO 'LW "sr 1;sr <br />*4 VEEDER- ROOT <br />June 24, 2004 <br />MSR 06-04-A <br />New Single Point Mini-Hydrostatic Sensor <br />1.0 Purpose <br />This Marketing Sales Release (MSR) announces the release of the Single Point Mini- <br />Hydrostatic Sensor (P/N 794380-304). <br />2.0 Product Description and Overview <br />Accurate and reliable detection of changes in the brine level in Double Wall Sumps is <br />critical for regulatory compliance, especially AB2481 in California. Veeder-Root's Single <br />Point Mini-Hydrostatic Sensor has been designed for sensitivity of level change, longer <br />life and increased robustness. <br />The new Single Point Mini-Hydrostatic Sensor is compatible with TLS-3XX Series, EMC <br />Series (except EMC-2) and Red Jacket ProMax and ProPlus consoles. It requires an <br />Eight Input Interstitial/Liquid Sensor Interface Module (329358-001) if used with TLS- <br />350 series, EMC Enhanced, EMC w/ BIR and Red Jacket ProMax. All other systems <br />have this capability built in. It will be programmed as a tri-state, single float sensor. <br />Alarm conditions are Sensor Open and Fuel Alarm. Any version of software is <br />acceptable. <br />A sample installation drawing is below. <br />Sensor in interstitial fluid reservoir <br />/.// / A/1 <br />1/2" conduit to. <br />TLS console <br />Seal-off and junction <br />box (customer supplied) <br />Use tie wraps to keep <br />cable clear of sump <br />components and lid <br />1911:11 -033. .13:1:1, =NM - <br />Tank <br />sensa,Ukochpl spe <br />PAGE 107