COMPLIANCE INFO 2007 - 2015 - Laserfiche WebLink

Home Browse Search

., low 0/5 c'/Page 4 of 8sYs'fMNCE 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer ❑Other(Specify) Test Method Used ❑ Pressure ❑Vacuum ❑ Hydrostatic ❑ Other(Specify) Test Equipment Used: Equipment Resolution: N Sump 1 S Sump 2 Sump Sump Sump Diameter: 36" 36" Sump Depth: 30" 30" Sump Material: FG FG Height from Tank Top to Top of 14 14 Highest Piping Penetration: Height from Tank Top to Lowest 16 16 Electrical Penetration: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 2" over product 2" over product Does turbine shut down when sump sensor detects liquid(both product and ❑ Yes ❑ No 0 NA ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA water)?* Turbine shutdown response time Is system programmed for fail-safe ❑ Yes ❑ No 0 NA ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?' Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA operational?* Wait time between applying pressure/vacuum/water and starting 5 min 5 min test: Test Start Time: 11:55 11:55 Initial Reading(Ri): 177/8" 163/4" Test End Time: 12:55 12:55 Final Reading(RF): 17'/a" 163/4" Test Duration: 1 h r 1 h r Change in Reading(RF-Ri): Q 0 Pass/Fail Threshold or Criteria: 1/16" in an hour 1/16" in an hour Test Result: 0 Pass ❑ Fail 0 Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass © Fail Was sensor removed for testing? 0 Yes ❑ No ❑ NA 0 Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced after 0 Yes ❑ No ❑ NA a Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA testing? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests) If the entire depth of the sump is not tested, specify how much was tested. If the answer to 4ny of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)