Laserfiche WebLink
BRAVO EPDXY-COATED STAINLESS <br /> STEEL HOSE CLAMPS <br /> Some Regulators / Inspectors do not approve of any kind of metal hose <br /> clamps on the outside of Underground Storage or Containment Equipment. <br /> Please note that these clamps are NOT associated with the primary seal <br /> between the conduit, the Fiberglass Fitting, and the Fiberglass Sump. <br /> Rather, these clamps are part of a tertiary seal that is a redundant <br /> measure against leaks. The clamp exists only to keep the boot over the <br /> outside end of the fitting to contain the adhesive while it cures, not as a <br /> primary or secondary seal between the conduit or the fitting. Bravo <br /> Systems Epoxy-coated SS hose Clamps have been installed across the <br /> nation on containment equipment since 1987. <br /> Standard Bravo procedure for clamps: Coat/encapsulate the entire <br /> surface area with Vulkem 116 polyurethane sealant. <br /> THE CLAMPS ARE NOT USED TO <br /> MAKE SEAL OF ANY KIND <br /> To find a sales representative for ROBROY Brand PVC-Coated conduit, <br /> please visit the below link, or call the main number for assistance. <br /> www.plastibond.com/RepMap.cfm 903 - 843 - 5591 <br /> If you have any problems with Bravo Systems components, DoubleWall <br /> Containment Systems, or accessories, Call Bravo Systems Immediately: <br /> 1 - 800 - 28 - BRAVO 1 - 323 - 888 - 4133 support@sbravo.com <br /> www. sbravo . com <br /> 13 ii-F-Series-1 X-SS-D-11 A <br />