Laserfiche WebLink
FIBERGLASS DOI _E-WALL SUMP INSTALLATION 1STRUCTIONS <br /> ASSEMBLEDD. SUMPS FIGURE D-2 <br /> Fill/Vapor Model <br /> Failure to properly test and seal joints may result in <br /> product loss,environmental damage,explosion, or fire. Multiport Watertight Lid - <br /> / 360•Hydrostatic Reservoir <br /> ' Enclosure Top <br /> Round Body Extension <br /> ASPHYXIATION FIRE EXPLOSION (Trim From Bottom <br /> For Field Adjustment) <br /> • Dry fit all sump components prior to sealing joints, as <br /> outlined in Section B. Field Bonded Adhesive Joints <br /> • All joints must be sealed with adhesive or layup Polygon or Round Sump Body <br /> material to provide watertight joints. <br /> • All piping and electrical penetrations(supplied by Field Bonded Adhesive Joints <br /> others)must seal the sump annular space. Containment Collar <br /> • Do not connect the sump annular space to any other Test Plug <br /> annular space. <br /> • Keep the sump lid, gasket and gasket groove free <br /> from contaminates. FIGURE D-3 <br /> • Install lid and seat gasket for 360 degrees. Flat Bottom Sump <br /> FIGURE D-1 Watertight Lid <br /> Watertight Lid Model <br /> 360° Hydrostatic <br /> Reservoir <br /> Watertight Lid <br /> Enclosure Top <br /> 360°Hydrostatic Reservoir Round Body Extension <br /> Enclosure Top (Trim From Bottom <br /> For Field Adjustment) <br /> Round Body Extension Field Bonded <br /> (Trim From Bottom Adhesive Joints <br /> For Field Adjustment) <br /> Polygon or Round <br /> Field Bonded Adhesive Joints Sump Body <br /> Polygon or Round Sump Body Test Plug <br /> Field Bonded Adhesive Joints Sump Bottom <br /> Containment Collar <br /> Test Plug ADDITIONAL STEPS FOR FLAT BOTTOM SUMP: <br /> • Install tank fitting adapters per the manufacturers <br /> installation instructions into the tank. Prepare sump <br /> bottom to accept tank fitting adapters. <br /> • Before placing sump on tank fitting adapters, place <br /> approved backfill between the tank top and transition <br /> sump bottom. Ensure there will be no backfill voids <br /> under the sump. <br /> 6 <br />