BILLING_PRE 2019 - Laserfiche WebLink

Home Browse Search

Date: June 25, 1999 VW 4WO WRITTEN MONITORING PROCEDURES UNDERGROUND STORAGE TANK MONITORING PROGRAM This monitoring program must be kept at the UST location at all times. The information on this monitoring program are conditions of the operating permit. The permit holder must notify San Joaquin Counri.OES and San Joaquin County Environmental Health within 30 days of any changes to the monitoring procedures,unless required to obtain approval before making the change. Required by Sections 2632(d)and 2641(h)CCR. Facility Name Ben-Holt/I-5 Shell Facility Address 3011 W. Benjamin Holt, Stockton A. Describe the frequency of performing the monitoring: Tank Continuous electronic monitoring. The system is remotely monitored by Veeder Root daily and all alarms will trigger an immediate notification to Veeder Root. Piping Continuous electronic monitoring. B. What methods and equipment, identified by name and model, will be used for performing the monitoring: Tank: Annular space monitoring and automatic tank gauging Veeder Root TLS-350 version 8473 & 8493, Simplicity system for the product tanks. Leak Rate: 0.2 gph, TLS- 350 annular space monitor for the Used Oil tank. Piping: Veeder Root TLS-350 with PLLD series 8484, pressurized line leak detection and positive shut down of the turbines. Leak rate of 0.3 gph. C. Describe the location(s) where the monitoring will be performed (facility plot plan should be attached): The monitor is located in the IN THE SERVICE BAY D. List the name(s) and title(s) of the people responsible for performing the monitoring and/or maintaining the equipment. John Kendrick/Dealer Lane Wager/Manager E. Reporting Format for monitoring: Tank: A written monitoring log. Piping: A written monitoring log and annual certification F. Describe the preventative maintenance schedule for the monitoring equipment. Note: Maintenance must be in accordance with the manufacturers' maintenance schedule but not less than every 12 months. The monitoring systems shall be certified annually in accordance with manufacturers recommendations System set-up must be checked to verify that the 99% operating mode option has been selected G. Describe the training necessary for the operation of UST system, including piping, and the monitoring equipment: The operators receive initial training when the equipment is first installed Each person attending signs a training letter certifying they received training. The station is provided a manual exylaining the alarms that become audible/visual, and it tells them what their response to these alarms should be. Refer to the stations Health & Safety green binder, Employee Training Section located at the cashier counter, for more detailed information.