Laserfiche WebLink
Sep 05 06 O4: 24p JP Pp*.roleum Service 9163724173 p. 4 <br /> Split Repair Boots Intallatiou Instructions <br /> j For Encapsulation Repairs) <br /> STEP 6 Position the insert into the boot if applicable,but do not tighten <br /> the clamp.This connection must remain loose through the filling <br /> t <br /> stage to allow air to escape. <br /> STEP 7 Fill the boot with either Parasealant 626, or Bostik 1100FS <br /> through the fill tube with the Blueline pneumatic dispensing gun <br /> until the entire cavity is full. This will ensure that the sealant <br /> pushes back through the leak point and stops the leak. <br /> All- <br /> STEP Once the boot is full, tighten clamps and allow sealant to fully <br /> cure. The sealant will gradually continue to cure up inside the <br /> boot and around the flange over the next 24-48 hours.However, <br /> you may start hydrostatic testing immediately as the repair is <br /> complete.BLUELINE r <br /> ■ ■ Drive, ■ :4- <br />