Laserfiche WebLink
11 <br />C <br />(C) Not Applicable: Installation is in USDA Climate Zone 9b, 25 -30F annual <br />minimum temperature. <br />(b) Installation Handling Procedures and Inspection: <br />(1) Weld Breaks: None <br />(2) Punctures: None <br />(3) Scrapes of Protective Coatings: None <br />(4) Cracks: None <br />(5) Corrosion: None <br />(6) Other Structural Damage: None <br />(c) Not Applicable: Tank is above ground. <br />(d) Initial installation testing: <br />The Convault waste oil tank was pressured tested to 5.0 psig for 24 hours by the <br />manufacturer prior to shipping per UL 142. <br />The PVC construction of the used coolant tank precludes pressure testing. <br />(e) Ancillary equipment, eg. piping from adjacent pump cabinet to the holding tanks, is <br />properly supported as specified in 2007 California Plumbing Code. <br />(f) Not Applicable: Exterior tank materials of construction, concrete and PVC are not <br />susceptible to corrosion and require no additional protective measure. <br />(g) Record Keeping <br />Responsibility of the facility operator <br />(h) This section applies to this installation per Title 22 CCR 66265.192 (h)(2)(A). <br />(i) Not Applicable: Tank is above ground. <br />Q) Design and Installation.. <br />(1) Secondary Containment: <br />The waste oil containment tank has double wall construction. The secondary <br />containment capacity is 1,500 gallons and is capable of containing 150% of the <br />contents of the tank and ancillary piping. <br />The used coolant tank has double wall construction. The secondary <br />containment capacity is 275 gallons and is capable of containing 138% of the <br />contents of the tank and ancillary piping. <br />(2) Not Applicable: Secondary containment is sealed from ambient precipitation. <br />