Laserfiche WebLink
3.4.3 Infection System Monitoring <br /> During the pilot study, MCTC or MCTC' s representative will monitor the <br /> injection rate at the two injection wells. Flow meters will be used to <br /> measure .the volume of water injected. The initial flow meter measurements <br /> will be recorded after the gravity feed injection system has been on-line <br /> for approximately 24 hours. Two additional flow meter measurements will <br /> be obtained during the middle and near the end of the pilot test. The <br /> measurements from the flow meters will be used to estimate the total <br /> volume of injected water between successive flow meter measurements. <br /> Results from the pilot study will be used to estimate the water injection <br /> rate to be anticipated during the full-scale flushing operation. An <br /> additional flow meter will be installed and monitored, to determine the <br /> total injection water flow rate of the full-scale flushing system. <br /> 11654.652 3-8 <br />