COMPLIANCE INFO 2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 6. PIPING SUMP TESTING Page 7 of Test Method Developed By: ❑ Sump Manufacturer D Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum D Hydrostatic ❑ Other (Spec) Test Equipment Used: TS -STS Sump # 91 Sump # 87-1 Equipment Resolution: 0.00" Sump # 87-2 Sump # 87 slave Sump Diameter: 48.00" 48.00" 48.00" 48.00" Sump Depth: 72.00" 72.00" 72.00" 72.00" Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of Highest Piping Penetration: 18.00" 18.00" 18.00" 18.00" Height from Tank Top to Lowest Electrical Penetration: 40.00" 40.00" 40.00" 40.00" Condition of sump prior to testing: Clean dry Clean dry Clean dry Clean dry Portion of Sump Tested' Highest penetration Highest penetration Highest penetration Highest penetration Does turbine shut down when sump sensor detects liquid (both product and water)? . ❑ Yes ❑No DNA ❑Yes ❑No DNA DYes ❑No DNA [I Yes [I No DNA Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail-safe shutdown?* ❑Yes []No DNA []Yes[]No DNA []Yes[]No DNA ❑Yes 0 N DNA Was fail-safe verified to be oerational?* ❑Yes ❑ No DNA ❑Yes ❑ No DNA ❑Yes ❑ No DNA []Yes ❑ No DNA Wait time between applying pressure/vacutum/water and starting test: 5min 5min 5min 5min Test Start Time: Initial Reading (R,): SEE INCON RESULTS SEE INCON RESULTS SEE INCON RESULTS SEE INCON RESULTS Test End Time: Final Reading (Rr): Test Duration: 15 min 15 min 15 min 15 min Change in Reading (RF -R,): Pass/Fail Threshold or Criteria: 0.002" 0.002" 0.002" 0.002" Test Result: D Pass ❑ Fail D Pass ❑Fail D Pass ❑ Fail D Pass ❑ Fail Was sensor removed for testing? D Yes ❑No ❑NA DYes []No [INA DYes ❑No [INA DYes ❑No ❑NA Was sensor properly replaced and verified functional after testing? DYes ❑ No ❑ NA DYes []No ❑ NA DYes ❑ No ❑ NA DYes ❑ No [INA Comments — (include information on repairs made prior to testing, and recommended follow-zip.for failed tests) ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to my of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)