COMPLIANCE INFO 2013 - 2017 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 ` age_6_of—7- 8. FILL RISER CONTAINMENT SUMP TESTIN 16 Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ t t '' .•e Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard' " ❑ Professional Engineer ❑Other(Spec) Test Method Used: ❑ Pressure ❑ Vacuum ®Hydrostatic ❑ Other(Spec) Test Equipment Used: VISUAL—TAPE MEASURE Equipment Resolution: +/\0.002" 6 i r •Y+i �,Et• •r Jv r � . a '4 Fill Sump#87(1) Fill Sump#87(2) Fill Sump#91 Fill Sump# Sump Diameter: 48" 48" 48" Sump Depth: 65" 64" 64" Height from Tank Top to Top of N/A N/A N/A Hi hest Pim Penetration: Height from Tank Top to Lowest 20" 22" 19" Electrical Penetration: Condition of sump prior to DRY DRY DRY testing: Portion of Sump Tested ABOVE ABOVE ABOVE PENETRATIONS PENETRATIONS PENETRATIONS Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS Wait time between applying pressure/vacuum/water and 10 MIN 10 MIN 10 MIN starting test: Test Start Time: 10:54 12:46 12:26 Initial Reading(Rj): 1.5083" 2.4686" 0.2481" Test End Time: 11:09 1:01 12:41 Final Reading(RF): 1.5083" 2.4705" 0.2480" Test Duration: 15 MIN 15 MIN 15 MIN Change in Reading(RF-R,): 0.0000" 0.0019" -0-00011, Pass/Fail Threshold or Criteria: +1-0.002" +1-0.002" +/-0.002" +/-0.002" Test Result: ® Pass ❑Fail ®Pass ❑ Fail ®Pass ❑Fail ❑Pass ❑ Fail Is there a sensor in the sump? M Yes ❑ No M Yes ❑ No ® Yes ❑ No ❑Yes ❑ No Does the sensor alarm when either product or water is ❑Yes ❑No ®NA ❑Yes ❑No ®NA [:]Yes ❑No ®NA ❑Yes ❑No ❑NA detected? Was sensor removed for testing? M Yes ❑No ❑NA ®Yes ❑No [:INA ®Yes ❑No ❑NA ❑Ycs ❑No []NA Was sensor properly replaced and verified functional after testing? ®Ycs ❑No ❑NA ®Yes El No 0 N ®Yes [:]No ❑NA ❑Yes ❑No ❑NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests)