Laserfiche WebLink
Installing Encore Island Adapter Kit <br />When cutting the Pit Box, fuel or explosive vapors may be present. Cap and seal all piping where <br />fuel may be present before modifying the Pit Box. DO NOT use a power tool or any tool that <br />generates any type of spark. Use a safe and non -sparking cutting method. Wear eye protection <br />when cutting the Pit Box. <br />8 Using an appropriate cutting tool and a safe and non -sparking cutting method, remove the lip <br />of the Pit Box as previously marked (see Figure 1 on page 5). This allows the Adapter Kit to <br />rest flush on the island and Pit Box. <br />9 Position the Island Adapter over the Pit Box (see Figure 2) to ensure proper fit, clearance, and <br />alignment, and then remove the Adapter. <br />10 Apply 3M 2084 Sealant liberally along the entire flat surface of the Pit Box perimeter <br />(see Figure 2). This sealant must form a water -tight seal between the Adapter and <br />Pit Box/island. <br />Figure 2: Positioning Encore Island Adapter on Existing Pit Box <br />Page 6 MDE-4166A The Advantage,& Series Unit to Encoree Series Island Adapter Kit (M03064K001) Installation Manual - March 2013 <br />