WORK PLANS - Laserfiche WebLink

Home Browse Search

5) Notifying the PM and SSO of special medical problems and confirming that on- site personnel are aware of any such problems. BSK personnel associated with the field operations of the project include: Project Manager: Richard Johnson Site Manager/Site Safety Officer: Jeff Yeazell Regional Health and Safety Manager: Robert Archer 4.5 Subcontractor's Safety Representative- Each subcontractor is required to designate a safety representative. That individual is responsible for the safe and healthful performance of work by,his work force and subcontractors. During the subcontractors' activities on-site, the safety representative will perform continuing work area inspections, and conduct safety meetings and safety orientations for new employees. He will attend periodic safety meetings with the SSO. The subcontractors'representative will also investigate accidents and over-exposures involving subcontractors'personnel. 5.0 JOB HAZARD ANALYSIS Chemical hazards on site include those associated with waste oil. Physical hazards include those from on-site traffic, drill rig operation, and underground and overhead utilities, if present. 5.1 Drill Rig Hazards Safe work practices for drill rig operation include: • When moving a rig off-road, pay particular attention to obstacles in the route of travel. Walk the route first. • Have an assistant guide the driver when in close proximity to hazards or if clearance is at a minimum. • Set the brakes and/or.block the wheels when the derrick(mast)is set up. • The derrick must be lowered when traveling off-road. • Be certain of the status of utilities (energized, charged, etc.) in the area of the rig. Call Underground Service Alert at least 48 hours in.advance of performing field work for assistance in locating utilities. • Consider overhead lines to be live. Watch for sagging lines when entering a site; call the specific utility company for assistance in moving them. • Do not operate a rig within 15 feet of overhead lines; check with local authorities to confirm the distance requirement. • Clearing the site of obstructions prior to setting up the rig. A-4