Laserfiche WebLink
;RI -31-2613 69,34 Service Station Systems 468 938 8808 P,60 <br /> 8, UNDER-DISPENSER CONTAINMENT (UDC)TESTING <br /> Test Method Developed By: ❑ UDC Manufacturer N Industry Standard p Professional Engineer <br /> ❑ Other(Specify) <br /> Test Method Used: p Pressure © VaCt1Um ®Hydrostatic <br /> ❑ Other(Specify) <br /> Test Equipment Used: Incon Sump Tester Equipment Resolution: +/-0.002" <br /> 11W.rn <br /> UDC#9/10 <br /> UDC Manufacturer: OPW <br /> UDC Material: Fiberglass <br /> UDC Depth: 31" <br /> Height from UDC Bottom to Top 10" <br /> of Highest Piping Penetration: <br /> Freight from UDC Bottom to 4„ <br /> Lowest Electrical Penetration: <br /> Condition of UDC prior to Good <br /> testing: <br /> Portion of UDC Tested 2"above piping <br /> Does turbine shut down when <br /> UDC sensor detects liquid(both ❑Yes❑No ®NA <br /> product and water)?* <br /> Turbine shutdown response time N/A <br /> Is system programmed for fail- ©Yes❑No ®NA <br /> safe shutdown?* <br /> Was fail-safe verified to be ❑Yes p No ®NA <br /> operational?* <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes <br /> starting test <br /> Test Start Time: <br /> Initial Reading(Ri): <br /> Test End Time: <br /> Final Reading (RF): <br /> Test Duration: <br /> Chane in Reading(RF-R,): <br /> Pass/Fail Threshold or Criteria: +!-0.002" <br /> Test Result: Pass ®Fail <br /> Was sensor removed for testing?— <br /> estin ? ❑Yes❑No 0 NA <br /> Was sensor properly replaced and ©Yeti❑No®NA <br /> verified functional after testing? <br /> omments—(include ira ormation on re airs made-prior to testing, and recommended foil ow-up.for failed tests) <br /> "Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work". <br /> Disp # 9/10—Torn Boot. <br /> ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an <br /> asterisk(")is"NCI'or"NA",the entire UDC must be tested. (See SWRCB LG-lb0) <br />