Laserfiche WebLink
Barbed fittings are a single wall design and are used to connect GeoFlex or <br />GeoVent piping. This piping connection system does not require the use of <br />pipe couplings or the GeoFlex° coupling machine. These UL listed fittings <br />should be corttained within containment sumps or cathodically protected in <br />direct bury application. <br />The barbed fittings are available in 1-1/2", 2" and 3" sizes and are shown in the <br />multi -application illustration below: <br />PT <br />Fitting <br />l� -Shear Valves <br />ThermaFlex <br />Connector <br />Test Tube \ <br />Barbed Male Barbed Pipe Barbed Clamp <br />Adapter Connector Assembly Steel Riser <br />/PipesWLFiAW\ <br />GeoFlex Piping Test Boots Connector Tube <br />Part Name Part Description <br />Barbed Male Adapter Connects the end of a GeoFlex pipe section to a female NPT threaded pipe fitting. <br />Barbed Pipe Connector Connects two GeoFlex pipe sections to each other. <br />Barbed Male Adapters <br />An adapter designed to connect one end of a flexible pipe <br />section to a female NPT threaded coupling or fitting. There is <br />a barbed insert with clamp assembly on one end and male <br />NPT threads on the other. When used with GeoFlex-D or <br />GeoFlex-M piping, it is recommended that a reducer test <br />boot with test tube be installed. These adapters are required <br />to be secondarily contained. <br />PART NO. SIZE <br />BMA -1515 <br />1-1/2"x 1-1/2" <br />BMA -1520 <br />1-1/2"x 2" <br />BMA -2015 <br />2"x 1-1/2" <br />PART NO. SIZE <br />BMA -2020 2"x 2" <br />BMA -3030 3"x 3" <br />® <br />envie 11 <br />