Laserfiche WebLink
Barbed Pipe Connectors <br />A connector designed to connect two flexible pipe sections. <br />Ideal for use in long piping runs. These connectors cannot be <br />direct buried and are required to be contained inside an in-line <br />piping sump or other containment sump. When used with <br />GeoFlex-D or GeoFlex-M, piping it is recommended that <br />reducer test boots with connector tubes be installed. Includes <br />two clamp assemblies. <br />PART NO. SIZE <br />BPC -1515 1-1/2" <br />BPC -2020 2" <br />PART NO. <br />SIZE <br />BPC -3030 <br />3" <br />Dual Adapter Fitting <br />An adapter designed to accommodate two flexible piping lines <br />exiting a tank sump. This adapter has a 2" female NPT threaded <br />opening at the top end and two openings at the bottom which <br />provide 1-1/2" male NPT threads. Typically these adapters are <br />part of a plumbing tree and fitted on the ends with conventional <br />female 2" x 1-1/2" reducing elbows. Dual adapters may also be <br />used for 2" piping lines. <br />Product Offset Adapter <br />PART NO. SIZE <br />DAF -2150 2" x 1-1/2" x 1-1/2" <br />An offset fitting is used with some product dispenser models <br />which require pipe locations significantly off -center. Refer to <br />the dispenser directory in the product price list to determine <br />which under dispenser containers require this fitting. <br />PART NO. SIZE <br />POA -1515 1-1/2" <br />2" NPT <br />1-112" NPT 1-1/2" NPT <br />1-1/2" NPT <br />;Ll <br />/2" NPT <br />environ, <br />