Laserfiche WebLink
Material Safety Data Sheet <br /> Hazard Rating: Least - 0 Slight- 1 Moderate - 2 High- 3 Extreme- 4 <br /> HMIS H-1, R0, F-2 <br /> Section 1 <br /> ASTC Polymers 1677 Superior Ave. Unit E, Costa Mesa, CA 92627 <br /> 949-646-1207- Fax 949-646-1146 <br /> Date Revised: July 1995 Emergency Phone: 949-646-1207 <br /> Product Name: Penatron 4036 Part B <br /> Section 2 Hazardous Ingredients/Sara IH Information <br /> Hazardous <br /> Components CAS # Occupational Exposure Limits Vapor Press. <br /> OSHA PEL ACGIH TLV MFG nun Hg/temp <br /> Petroleum Hydrocarbon <br /> 64742-94-5 n/a n/a 100 ppm 2.3 392F <br /> Aromatic amine catalyst <br /> 68479-98-1 <br /> Substances listed in the ingredients Section are those identified as being present at a <br /> concentration of 1% or greater, or 0.1% if the substance is on the list of potential carcinogens <br /> cited in OSHA Hazard Communication Standard, 29 CFR 1910,1200 (1). <br /> Section 3 Physical & Chemical Characteristics <br /> Boiling Pt: > 300 Degrees F Specific Gravity(H2O=1): 1.045 <br /> Vapor Density: Heavier than air Evaporation: Slower than ether <br /> Solubility in Water: N/A Appearance& Odor: Coffee Brown liquid with low <br /> to mild odor. <br /> Section 4 Fire and Explosion Hazard Data <br /> Flash Point: 360 Degrees F Method Used: PMCC <br /> Flammable Limits in air by volume - lower: N/A Upper: N/A <br /> Extinguishing Media: Foam COQ Dry Chemical <br /> Special Fire Fighting Procedures: Wear self contained breathing apparatus with positive <br /> pressure mode, face piece, boots, gloves (Neoprene), goggles, protective clothing. <br /> Unusual Fire and Explosion Hazards: Closed containers may rapture due to high temperature <br /> and indired pressure. <br /> Section 5 Reactivity Data <br /> Stability: Stable <br /> Conditions To Avoid: Heat, open flame and sparks. <br /> Incompatibility - materials to avoid: Isocyanates and strong oxidizing Agent Hazardous <br /> Decomposition/ By Products: Carbon Dioxide, Carbon Monoxide,Nitrogen Oxide trace <br /> amounts of Hydrogen Cyanide. <br /> Hazardous Polymerization: Will not occur. <br /> ASTC Pal ymers l MSDS 4036 EFF020102 <br />