Laserfiche WebLink
File MH28727 Vol. 1 Sec. 1 Page 2 Issued: 2004-01-05 <br />and Report Revised: 2012-10-09 <br />CONSTRUCTION DETAILS: <br />1. Sump Penetration Fittings, Reducers and Inserts - Fittings are <br />fabricated of virgin material, Dow Chemical Company "PELLETHANE 2355- <br />75A" or Lubrizol "Estane 58226" polyurethane elastomer to the shapes as <br />shown in ILLS. 2 through 11, ILLS. 13 through 26, and ILLS. 27 through <br />77, inclusive. Other sizes, as described in ILL. 12, may also be <br />fabricated. Fittings are packaged with zinc plated back plate, nuts, <br />stainless steel hose clamps and installation instructions. Reducers are <br />packaged with stainless steel hose clamps and installation <br />instructions. Inserts are packaged as individual item. <br />2. Split repair boots, inserts and reducers are fabricated of virgin <br />material, Dow Chemical Company "PELLETHANE 2355-75A" or Lubrizol <br />"Estane 58226" polyurethane elastomer and are bonded with the Blue Seal <br />glue kit. Instructions for the Blue Seal glue kit are in ILL. 1C. Boots <br />are then filled with Bostik 1100 Fast Set Urethane Sealant. The above <br />products are covered under Follow -Up Service in Appendix B and C of <br />this volume. <br />