WORK PLANS - Laserfiche WebLink

Home Browse Search

V� U WG 25 X016 January 25, 2016 Monitoring Well Abandonment Workplan IRONIUIi 7. ` .. H DE" T receive site-specific training prior to beginning work.The licensed driller should be responsible for the safe operation of the drill rig as well as the crew's adherence to all safety procedures.The crew members and other personnel at the site should wear protective equipment(i.e.,hard hat,gloves, and steel toed boots),and be aware of all hazards and control procedures.All personnel working at the site should participate in the Daily Safety Meetings and be aware of all emergency procedures. Before drilling,the existence and location of underground pipe, electrical equipment and gas lines should be determined.Documentation that nearby utilities have been marked on the ground,and that the drill site has been cleared should be in the possession of the Field Operations Manager prior to commencement of drilling at the site.If drilling is conducted in the vicinity of overhead power lines,the power to the lines must be shut off or the equipment must be positioned and blocked such that no part,including cables can come within the minimum clearances of the lines.All well sites should be inspected by the driller prior to locating the rig to ensure a stable surface exists. 2. Monitoring Well Abandonment Ten existing monitoring wells are recommended for abandonment.The principal objective of destroying and sealing wells is to restore,as far as possible,the original (natural) hydrogeologic conditions that protect groundwater.The following general procedure should be employed to abandon and seal the monitoring wells that are approved for abandonment. Per San Joaquin County Well Standards,monitoring wells should be destroyed by a C-57 licensed contractor under the direction of a California Registered Professional Engineer,California Professional Geologist,or a California Certified Engineering Geologist.All work should be performed in accordance with San Joaquin County Well Standards.After receiving approval from RWQCB staff,the following requirements pertaining to abandoning monitoring wells should occur. • Finalize abandonment plans with private property owners and obtain right-of-access agreements (CLSP-2,CLSP-10, MWR-6,MWR-13, MWR-15,and MWR-20). • Obtain well destruction permits from the San Joaquin County Environmental Health Department(SJCEHD). • Obtain encroachment permit from the City of Lathrop for Mossdale wells located within the street right-of-way(MWM-14, MWM-16,and MWM-26). • Schedule well destruction inspections with the County and perform all sealing operations in the presence of a County inspector,unless directed otherwise by the County. • Before destruction,sound well to determine whether there are obstructions that could interfere with filling and sealing. Obstructions found in the well or boring should be removed before filling and sealing operations begin. HydroFocus, Inc. 4