Laserfiche WebLink
D. Results of Testing/Servicing <br />Software Version Inst2I3ed: <br />Coniplete the following checklisL- <br />'06 <br />❑ No* <br />Is the audible alarm operational? <br />IR Y s <br />❑ No* <br />I Is the visual alarm operational? <br />No* <br />Were all sensors visually inspected, functionally tested, and confirmed operational? <br />Yes <br />❑ No* <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br />not interfere with their Mer operation. <br />❑ Yes <br />❑ �°#- <br />If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. tnodem) <br />N/A <br />operational? - <br />Yes <br />Cl No* <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br />❑ N/A <br />monitoring system detects a leak, fails to or is electrically disconnected? If yes: which sensors initiate <br />positive shut -down? (Check all that apply) ClSump/'Trench Sensors; ❑ Dispenser Co.nment Sensors. <br />Did you confirm positive shutdown due to leaks and sensor failureldisconnection? Zes; ❑ No. <br />❑ Yes <br />❑- No* <br />For tank systems that utilize the monitoring system as the primary tank overfdl warning device (i.e. no <br />"A <br />mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br />fillpoint(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? % <br />:1Yes* <br />No <br />Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced <br />and list the manufacturer name and model for all replacement parts in Section F. below. <br />Ef'Yes* <br />❑ No <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all rlta: apply) <br />Product; ❑ Water. if yes, describe causes in Section E, below. <br />U Yes <br />❑ No" <br />Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if applicable <br />L2 Yes <br />❑ No* <br />Is all monitoring rent operational per manufacturer's specifications? <br />* In Section E below, describe how and when these deficiencies were or will be corrected. <br />E. Comments: cW �,'�t�� r/✓ <br />Page 2 of 3 <br />43/01 <br />