Laserfiche WebLink
AL4LV. ENANCE sREDULE <br /> • Check Vapor Extraction Blower oil Month <br /> (Masintenanc�- procedure in product bulletin) <br /> • Change Vapor Extraction Blower oil Bi-Yesriv <br /> (Maintenance procedure in product bulletin) <br /> • Check Vapor Extraction Blower Belts Month <br /> (Should have %" of play up and down. and not cracked) <br /> Grease Motor fittings Monthiv <br /> (Use grease gun on znrk fittings, give two pumps to the fittings) <br /> • Check Element Wire connections Month <br /> (Tighten them if necessary) <br /> • Check Entzamnient Separator Filter Til;Yeariy <br /> (Remove Entrainment Separator lid, clean or replace as needed) <br /> • Clean out Entrainment Separator Year <br /> (Use clean water to rinse sides and remove hand clean out for debris) <br /> • Check Electrical Panel connections Bi-Yeariv <br /> (Use torque chart provided on the electrical drawing) <br /> • Check Water Pump and Purge Blower monthly <br /> (Insure proper operation) <br /> . • Clears Catalyst Cell Yeariv <br /> (Send to Manufacturer for this service) <br /> • Check Flow Transmitter drain]sties Wee <br /> (Open petcocks and dram line, close petcock) <br /> • Check Thermocouple wiring at Thermocouple Bi-Year <br /> (Open TIC head and inspect w'rg, change if necessary) <br /> • Check Drive Motor linkage on Isolation Valve Bi-Yearly <br /> (Check adjustment screws, tighten if necessary) <br /> Lubricate Butterfly Valves Bi-Yearly <br /> (Spray WD-40 into valve area under vacuum) <br />