Laserfiche WebLink
Replacing the ECPU Board <br />Restoring System Setup Data - ECPU Board <br />ARCHIVE UTILITY <br />RESTORE SETUP DATA <br />END TIME: <br />MMM DD, YYYY HH: Mm XM <br />SYSTEM SETUP <br />MMM DD, YYYY HH: MM XM <br />This information is followed by a complete printout of the system setup. The front panel display should read: <br />MMM DD, YYYY HH:MM:SS XM <br />BATTERY IS OFF <br />6. Press the ALARM/TEST key to acknowledge the alarm. The printer prints: <br />MMM DD, YYYY HH: MM XM <br />SYSTEM STATUS REPORT <br />ALL FUNCTIONS NORMAL <br />And the front panel display reads: <br />MMM DD, YYYY HH:MM:SS XM <br />ALL FUNCTIONS NORMAL <br />7. Close and secure the left front door, <br />8. If necessary, refer to your System Setup manual to make any corrections or additions to your system setup. It <br />is good practice to archive your system setup to the E2 chip after you have made any additions or corrections <br />to the setup. <br />12 <br />