Laserfiche WebLink
Page 1 Issued: 2004 -01 -OS <br />File MH28727 Vol. 1 App. C g Revised: 2006-10-04 <br />APPENDIX C <br />Northbrook Lab 3027BNBK: <br />GENERAL <br />The following tests shall be conducted on samples received from the <br />Field Representative. <br />Tensile Strength and Elongation Tests - Tensile and elongation shall be <br />conducted on samples cut from the flexible entry boot material. Minimum as - <br />received tensile strength and elongation shall be as follows. <br />Compound Designation Minimum Tensile Strength (psi) Elongation (%) <br />497 to 608 <br />2355-75A 4970 <br />volume Change Test - The volume change shall be conducted on samples <br />cut from the flexible entry boots. The results shall be within the range <br />specified below. <br />Compound Designation <br />70 h Immersion Fluid allowable Volume Swell <br />2355-75A <br />ASTM Reference Fuel C 17.6 to 27.6 <br />QUALITATIVE INFRARED ANALYSIS: <br />Method <br />An infrared spectrum of the material is to be obtained by means of an <br />Instrument settings used in obtaining the spectrum <br />infrared spectrometer. <br />d in obtaining the original spectrum of the <br />are to be identical to those use <br />material referenced in this procedure. <br />The spectrum obtained shall indicate the same composition as that <br />recorded in the spectrum obtained under the original investigation. <br />Spectrum Date <br />compound Designation <br />N09-03-06 <br />Bostik 1100 Fast Set Urethane Sealant N09-05-06 <br />Blue Seal Glue <br />