INSTALL 2005 - Laserfiche WebLink

Home Browse Search

Monitoring System Certification A Results of Testing/Servicing Software Version Installed: 324.02 Complete the following checklist: Yes ❑ No* Is the audible alarm operational? Yes ❑ No* Is the visual alarm operational? Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? ❑ Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) ■ N/A operational? Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment ❑ N/A monitoring system detects a leak,fails to operate,or is electrically disconnected? If yes: which sensors initiate positive shut-down? (Check all that apply) ■Sump/Trench Sensors; ■Dispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ■Yes; ❑No. ❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no ■ N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank fill point(s)and operating ro erl ? If so,at what percent of tank capacity does the alarm trigger? % ❑ Yes* ■ No Was any monitoring equipment replaced? If yes, identify specific sensors,probes,or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E,below. ❑ Yes* ■ No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)❑ Product; ❑Water. If yes,describe causes in Section E,below. Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable Yes ❑ No* I Is all monitoring equipment oerational per manufacturer's specifications? * In Section E below,describe how and when these deficiencies were or will be corrected. E. Comments: Fill sumps,STP sumps and UDC's are all Double wall and brine filled.All have Veeder-Root model 794380-322 sensors. The vent transition box is Double wall and brine filled with Veeder-Root model 794380-208 and 794380-322 sensors. The Continous Vacuum on the secondary lines is monitored with Veeder-Root model 330020-408 Smart sensors. UN-036-2/4 Page 2 of 3 Rev.06/04/01 www.unidocs.org