SU0006196 - Laserfiche WebLink

Home Browse Search

09/06/2006 14:25 FAX 2306475 4 003/005 Antonio Saicedo September 6, 2006 PA-0600440(SA)(Pre-application) Paye 2 Rule 4002 (National Emission Standards for Hazardous Air Pollutants) In the event that any portion of an existing building will be renovated, partially demolished or removed, the project will be subject to District Rule 4002. Prior to any demolition activity, an asbestos survey of existing structures on the project site may be required to identify the presence of any asbestos containing building material (ACBM). In accordance with CAL-OSHA requirements, a certified asbestos contractor must remove any identified ACBM having the potential for disturbance. If you have any questions concerning asbestos related requirements, please contact Mr. Joe Avila of this office at (559) 230-5951, Ms. Jan Sudomier at (209) 557-6422, or contact CAL- OSHA at (559) 454-1295. The District's Asbestos Requirements Bulletin can be found online at http://vallevair.org/busind/compIV/asbestosbultn,htm. Rule 4102 (Nuisance) This rule applies to any source operation that emits or may emit air contaminants or other materials. In the event that the project or construction of the project creates a public nuisance, it could be in violation and be subject to District enforcement action. Rule 4601 (Architectural Coatings) This rule limits volatile organic compounds from architectural coatings by specifying architectural coatings storage, clean up and labeling requirements and applies to any person who supplies, sells, offers for sale, applies, or solicits the application of any architectural coaling. Rule 4641 (Cutback, Slow Cure, and Emulsified Asphalt, Paving and Maintenance Operations) If asphalt paving will be used, then paving operations of this project will be subject to Rule 4641. This rule applies to the manufacture and use of cutback asphalt, slow cure asphalt and emulsified asphalt for paving and maintenance operations. Rule 9510 (Indirect Source Review) This rule was adopted to reduce the impacts of growth in emissions from all new development in the San Joaquin Valley. Rule 9510 requires applicants subject to the rule to provide information that enables the District to quantify construction, area and operational PM10 and NOx emissions, and potentially mitigate a portion of those emissions. An application must be filed with the District no later than concurrent with application with a local agency for the final discretionary approval. For more information and instruction, please contact the District's ISR staff by phone at (559) 230-5800 or by email at ISR(cDvalleyair.orq. The District encourages innovation in measures to reduce air quality impacts. There are a number of features that could be incorporated into the design/operation of this project to provide additional reductions of the overall level of emissions. Any measure selected should be implemented to the fullest extent possible.) The suggestions listed below should not be considered all-inclusive and remain options that the agency with the land-use authority should consider for incorporation into the project. • Large canopy trees should be carefully selected and located to protect the building(s) from energy consuming environmental conditions, and to shade 50% of paved areas within 15 years. Also, trees should be planted adjacent to all sidewalks thirty foot on center and at a ratio of one tree for each five parking spaces. Structural soil should be used under paved areas to Improve tree growth. For information on Structural Soil see http://www.hort.cornell.edu/uhi/outreach/csc/. For information on Tree Selection see http://www.ufei.org/. For Urban Forestry see http://www,coolcommunities.org htto:/Iwcufre.ucdavis.edu/ and http://www.igc.org/bookstore/energy/downloads/sly tree quidelines.pdf. • As many energy conserving and emission reducing features as possible should be included in the project. Energy conservation measures include both energy conservation through design and operational energy conservation. Examples include (but are not limited to): - Increased energy efficiency (above California Title 24 Requirements) See http://www.energy.ca.gov/title24/. - Energy efficient widows (double pane and/or Low-E), lighting, appliances, and heating and cooling systems. See http://www.energystar.gov/