Laserfiche WebLink
CPC CARR 2003 C&rtiNcation UsUng Fags 3 <br /> 3.0 Summary and Dbcusslon of ResuNs <br /> 3.1 Objectives and Test MaMx <br /> The objective of this test program was to measure NO:,CO.VOC,SO2.CO2,Oz emissions and the exhaust <br /> flaw rate of a BioMax 50 generator set during while combusting bio-fuel. The results of the teats are being <br /> used to evaluate It the unit compiles with the CA DPG 2003 Amita. The testing was conducted during a <br /> single extended day. The test time chronology Is presented In Table 3. <br /> Table 3 Measurement Time chronology <br /> 1 <br /> Test No.L Load Start Time End Time <br /> Run 1 I00'S Load 12:50 13:20 <br /> Run 1 75%6 Load 13,45 14:15 <br /> Run 1 5076 Load 14:50 15:20 <br /> Run 2100%Load 15:45 16:15 <br /> Run 2 75%Load 16:43 17:13 <br /> Run 2 5096 Load 17:36 18:06 <br /> Run 3 100%Load 18:30 19:00 <br /> Run 3 7596 Load 19:15 19:45 <br /> Run 3 5D%6 Load 19:58 20:28 <br /> 3.2 Field test Changes and Problems <br /> No field test charges were enacted nor were problems encountered with the testing of the BloMax 50. AA <br /> pre and post test performance checks met the test method limits. <br /> 3.3 Summary of Results <br /> The weighted average arnlssion rate from the BloMax 50 was measured to be below the CA DPG 2003 <br /> limits. Since the fuel source used for the test demonstration was bio-k*L the CO2 emissions are considered <br /> to be environmentally neutral. A summary of these results Is provided In Table 4. The complete set at raw <br /> and calculated data Is provided In the Appendices. <br /> repart <br /> TRC ENVIRONMENTAL CORPORATION 49614-0000-00000 <br /> CAProlech\CPC 49614 0D004D0D0\ppcs\CPC Sk"M 50 Report Vea2doc <br />