SU0011183 - Laserfiche WebLink

Home Browse Search

and supporting calculations, prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with the 2013 California Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. (2) The required plans must be complete at the time of submittal for a building permit. Plans must address building design and construction, fire and life safety requirements, accessibility and show compliance with the current California codes and San Joaquin County ordinances. A complete set of plans must include fire sprinkler plans, truss calculations, energy calculations, plumbing, electrical and mechanical drawings as well as structural calculations. (3) A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code.The plans shall show the existing grade on adjoining properties insufficient detail to identify how grade changes will conform to the requirements of the code. (4) A soils report is required pursuant to Section 1803 for foundations and appendix Section J104 for grading of the CBC. All recommendations of the Soils Report shall be incorporated into the construction drawings. (5) A demolition permit will be required for the structure(s)which is(are) proposed to be removed. (6) For each proposed building, provide the following information on the plans: (A) Description of proposed use (B) Existing and proposed occupancy Groups (C)Type of construction (D) Sprinklers(Yes or No (E) Number of stories (F) Building height (G)Allowable floor area (H) Proposed floor area (1)Occupant load based on the CBC (7) Accessible routes shall be provided per CBC Section 11B-206. At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible building or facility entrance they serve. Where more than one route is provided, all routes must be accessible. §11 B-206.2.1 At least one accessible route shall connect accessible buildings, accessible facilities, accessible elements, and accessible spaces that are on the same site. §11 B-206.2.2 At least one accessible route shall connect each story and mezzanine in multi-story buildings and facilities. §11B-206.2.3 At least one accessible route shall connect accessible building or facility entrances with all accessible spaces and elements within the building or facility, including mezzanines, which are otherwise connected by a circulation path. §11 B-206.2.4 PA-1600179 (SA) Conditions of Approval 3