SU0002217 - Laserfiche WebLink

Home Browse Search

y CV) v i CONDITIONS OF APPROVAL UP-99-13 Padilla Use Permit Application No. UP-99-13 was approved by the San Joaquin County Planning Commission on October 7, 1999. The effective date of approval is October 17, 1999. This approval will expire on April 17, 2001, which is 18 months from the effective date of approval, unless (1) all Conditions of Approval have been complied with, (2) all necessary building permits have been secured and remain in force, and (3) all necessary permits from other agencies have been secured and remain in force. Unless otherwise specified,all Conditions of Approval and Ordinance requirements shall be fulfilled prior to the establishment of the use and the issuance of any building permits. Those Conditions followed by a Section Number have been identified as Ordinance requirements pertinent to this application. Ordinance requirements cannot be modified, and other Ordinance requirements may apply. 1.. COMMUNITY DEVELOPMENT DEPARTMENT(Staff Contact: Jeff Fisher,468-9653) a. BUILDING PERMIT: Submit an "APPLICATION-COMMERCIAL BUILDING PERMIT." The Site Plan required as a part of the building permit must be prepared by a registered civil engineer or t licensed architect. This Plan must show drainage,driveway access details(including gates),on-site parking, landscaping, signs, existing and proposed utility services, and grading (refer to the "SITE PLAN CHECK LIST' for details). A fee is required for the Site Plan review. (Development Title Section 9-884) b. APPROVED USE: This approval is for the addition of a 4,025-square-foot prefabricated metal building to be used as a truck tire repair shop, accessory to an existing truck stop (UP-81-46), and the addition of thirty-two(32) overnight truck parking spaces as.shown on the Site Plan submitted June 9, 1999. c. TRUCK PARKING: Truck parking shall comply with the following: (1) All parking spaces, driveways, and maneuvering areas shall be surfaced and permanently maintained with base material of appropriate depth and asphalt concrete or Portland cement concrete to provide a durable, dust-free surface. Bumper guards shall be provided where necessary to protect adjacent structures or properties. (DevelopmentTitle Section 9-1015.5) (2) One(1)truck parking space shall be provided for every truck parked at the facility. (3) Spaces shall be a minimum twenty-five feet in length and fifteen(15)feet in width and shall have minimum height clearance of fourteen(14)feet. (Development Title Section 9-1015.6[c][1]) (4) Spaces shall not interfere with vehicular circulation or parking or with pedestrian circulation. (Development Title Section 9-1015.6[c][2]) (5) Aisles between truck parking areas shall be a minimum of fifty-five(55)feet wide. (Development Title Section 9-1015.6[d][2]) (6) All truck parking spaces shall be delineated with a sign or painted surface. Conditions of Approval - 1 - UP-99-13 a 1