Laserfiche WebLink
Nitrate Loading Estimate <br /> A nitrate loading scenario was employed to determine the impact from the proposed <br /> project to ground water. The scenario utilizes the variables discussed previously, which <br /> represent the estimated conditions and uses associated with this project. The following <br /> table presents a summary of the assumptions for the nitrate loading calculation for the <br /> Site, as presented in Plate 13. <br /> Table 3. Assumptions for Nitrate Loading Calculation <br /> Variable Value Units Description <br /> Q 840 gpd Effluent flow rate <br /> Nw 35 mg/L-N Effluent stream concentration <br /> A 1.49 acres Site area <br /> Nb 0.3 mg/L-N Concentration of rain <br /> d 0.35 constant Denitrification factor <br /> R 3.12 inches per year Recharge rate of rainfall <br /> W 7.6 inches per year Uniform waste water loading (calculated) <br /> The details of the nitrate loading calculation are included in Plate 13. The results of the <br /> calculation are presented in the following table. <br /> Table 4.. Result of Nitrate Loading Calculation <br /> Variable Value Units Description <br /> Nc 16.2 mg/L-N Long-term average concentration of percolating effluent <br /> The US EPA recommended MCL for nitrate in drinking water is 10 mg/L-N. In a worst- <br /> case situation, the maximum buildup of nitrates in the aquifer from the use of septic <br /> systems on the Site is predicted to be 16.2 mg/L-N. The result of the nitrate loading <br /> estimate exceeds the maximum drinking water standard. <br /> LOGE 1925 Page 11 <br />