Laserfiche WebLink
16. Tanks subject to floatation. (Section 2635 (a) (7)] <br /> TT v A. Anchored by deadman or slab. <br /> 8. Anchors to be installed as specified by manufacturer. <br /> C. Installation details provided on plans. <br /> D. Calculations provided. <br /> 17. SPILL AND OVERFILL PREVENTION <br /> Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br /> container(s)/piping sump(s) required, including tank fill and all openings). <br /> _ A. Spill container (Section 2635 (b) (1)]. <br /> _ If made of metal, exterior wall protected from galvanicorrosion. <br /> 9 <br /> X Capacity: (minimum of five gallons) 5 G A L t ¢ v 1. <br /> X Equipped with a drain valve which allows drainage <br /> 'lof� spilt into primary container. <br /> Manufacturer- -F'Q]ofJ'�-_ JV XI-) - C'+ V\i <br /> B. Overfill prevention system does not allow for manuat override and meets one of the following requirements: <br /> X (1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audible <br /> and visual alarm (Section 2635(b)(2)(A)] . <br /> Manufacturer:—Q,0' = Model: - <br /> (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than <br /> 95% capacity and activates an audible alarm at least five minutes before overfill (Section 2635 <br /> (b) (2) (B)l. <br /> Manufacturer: Model: <br /> (3) Provide positive shut off at no more than 95% capacity (Section 2635 (b) (2) (C)]. <br /> Manufacturer: /, Model: S <br /> (4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br /> exposed to the product overfilling (Section 2635 (b) (2) (D)l. <br /> Manufacturer: Model: <br /> 18. PIPING INFORMATION <br /> PIPING INFORMATION TANK'# TANK# 2 TANK# TANK# <br /> DISTANCE from <br /> DISPENSER to TANK <br /> MANUFACTURER <br /> SYSTEM TYPE ' <br /> CONSTRUCTION -- DOUBLE WALL <br /> MATERIAL --- FIBERGLASS REINFORCED <br /> LEAK DETECTION SYSTEMJ <br /> I'y �;�%/- �� <br /> 100% METHANOL COMPATIBILITY X YES NO <br /> CORROSION PROTECTION X YES NO <br /> - System Type; suction, pressure, and gravity <br /> `- Construction: single-walled, double-walled, tined-trench, etc. <br /> ''` Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br />