Laserfiche WebLink
31604.DSK <br /> WP-SFO <br /> 10. Photocells: Submit manufacturer's catalog data, including voltage, <br /> capacity, contacts, operating levels, enclosure, temperature range, <br /> time delay, power consumption, and dimensions. <br /> PART PRODUCTS <br /> 2.1 GENERAL <br /> A. Where two or more units of the same class of material or equipment are <br /> required, provide products of a single manufacturer, Component parts of <br /> materials or equipment need not be products of the same manufacturer. <br /> 2.2 NAMEPLATES AND LABELS <br /> A. Provide a nameplate to label each electrical device and wiring enclosure. E <br /> 2.3 EQUIPMENT SUPPORTS AND FOUNDATIONS <br /> A. Provide equipment supports and foundations for all equipment. <br /> 2.4 STORING AND PROTECTION OF ELECTRICAL EQUIPMENT DURING <br /> CONSTRUCTION <br /> A. All equipment shall be stored and protected in accordance with the <br /> manufacturer's recommendations and as specified. <br /> 2.5 OUTDOOR EQUIPMENT <br /> l <br /> A. Equipment and devices to be installed outdoors or in unheated enclosures <br /> shall be capable of continuous operation within an ambient temperature <br /> range of 0° F to 120° F. <br /> 2.6 HAZARDOUS AREAS <br /> A. Provide materials and equipment acceptable to the regulatory authority <br /> having jurisdiction for the class, division, and group of hazardous area <br /> indicated. Acceptable manufacturers: Crouse-Hinds, Appleton, or equal. <br /> 2.7 CONDUITS <br /> A. Galvanized Rigid Steel Conduit: Use rigid steel conduit, including threaded <br /> type couplings, elbows, nipples, conduit bodies, and other fittings, <br /> galvanized by hot-dipping, electroplating, sherardizing, or metalizing <br /> process and meeting the requirements of ANSI C80, NEMA FB 1, UL, and <br /> the NEC. Provide watertight couplings and connections; explosion-proof in <br /> hazardous areas. <br /> B. Explosion-Proof Flexible Conduit: Use UL-listed liquid-tight flexible <br /> conduit consisting of outer bronze braid covering an inner brass core with <br /> insulating liner on sizes 112 inch through 2 inch, outer stainless steel braid <br /> covering inner stainless steel core with insulating liner on sizes greater than <br /> 2 inches. { <br /> BAE31604.AS.T1 <br /> 16005 3 ELECTRICAL SYSTEM I.. <br />