Laserfiche WebLink
31604.DSK <br /> + WP-SFO <br /> C. Hazardous Areas: Use only fittings, boxes and couplings approved for the <br /> r <br /> atmosphere involved. <br /> 2.8 CONDUCTORS <br /> A. Provide copper conductors. All conductors shall be stranded. <br /> 1. Insulation: Provide conductors with Type RHW insulation. Provide <br /> factory, color-coded conductor insulation with a separate color for <br /> each voltage as specified herein under conductor color coding. <br /> 2. Sizes: No wire smaller than size No. 12 AWG shall be used for <br /> power, No. 14 AWG for control. Do not provide conductors smaller <br /> than those indicated. <br /> 3. Wire Color Identification: Neutral wire white; black, red, blue on <br /> 1201208-volt system; brown, orange, yellow on 4801277-volt system, <br /> neutral wire white. Ground wire green. <br /> fB. Equipment Grounding Conductors: <br /> 1. Provide stranded copper conductors, as indicated or as required by <br /> NEC, for equipment grounding. <br /> 2. Provide conductors with green Type TW insulation with a minimum <br /> thickness of 2164 inch. <br /> 2.9 LUMINAIRES <br /> A. General: Provide a high pressure sodium area light mounted 25 feet above <br /> grade on a round straight pole with natural color. . <br /> B. Manufacturers: . <br /> 1. GARDCO Form 10, 100 watt, 217-volt ac, Model CA1711-100 HPS. <br /> 2. Or equal. <br /> 2.10 LAMPS <br /> A. General: Provide lamps of the types and sizes indicated for each luminaire. <br /> For high pressure sodium lamps, provide "color corrected" version of <br /> wattages specified where available. <br /> B. Manufacturers: <br /> 1. High-Pressure Sodium: General Electric, Sylvania, North American <br /> Phillips, or equal. <br /> 2.11 BALLASTS <br /> A. General: Provide ballasts conforming to ANSI and UL standards for light <br /> output, reliable starting, radio interference, and dielectric rating. Provide <br /> only ballasts that are UL listed. Replace all noisy and defective ballasts. <br /> Provide ballasts for use in exterior luminaires to produce reliable starting of <br /> the lamps at -20° F at 90 percent of nominal line voltage. <br /> I , <br /> BAE31604.AS.T1 <br /> 16005 4 ELECTRICAL SYSTEM <br />