Laserfiche WebLink
1 <br /> • When hand tools are being used overhead, those working or standing below must <br /> be noted <br /> t • Pipe wrenches must be mspected regularly. Replace the heel and Jaw sections if <br /> found to be defective or worn out <br />' • Pipe wrenches must not be used to bend, raise or lift pipe <br />' • Always wear safety glasses to protect the eyes. <br /> When using power tools, the following precautions shall be followed <br /> • Eye protection (safety glasses or goggles) must be worn whenever operating <br />' power tools <br /> • Power tools must be grounded or of the double-insulated type. <br />' • Power tools shall not be used in wet locations <br />' • All power tools must be protected by a Ground Fault Circuit Interrupter (GFCI) <br /> • Splicing, cutting or "repairing" electrical wire by unauthorized personnel zs <br /> prolubited <br /> • Plugs and cords must be protected from damage <br /> • Grounding plugs are never to be removed. <br /> 1 Electrical tools are not to be used inside a confined space without prior approval <br /> by the HS Representative <br /> • All electrical tools must be tamed off before connecting or disconnecting the <br /> power supply <br />' Extension cords must be visually inspected each time they are used. Cords must <br /> be disconnected from the power source before coiling for storage <br />' Extension cords used with portable electric tools shall be of three-wire type and <br /> shall be rated for hard or extra-hard usage (Types S, ST, SO, STO, SJ, SJO, <br /> SJT, or SJTO) <br /> M7111-29-44/RHS/HASP/94-0037.JAF 4-9 <br /> 1 <br />