COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

i 990589 IRIDITE NCP,SrAR7 Section 8. Exposure controls/personal protection Control parameters C3ccupational ex��nsure limits None. Appropriate engineering Goad general ventilation should be sufficient to control worker exposure to airborne controls contaminants. Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure controls they comply with the requirements of environmental protection legislation. In some eases, fume scrubbers,filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. Individual nrotection measures [ Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before t eating,smoking and using the lavatory and at the end of the working period, Appropriate techniques should be used to remove potentially contaminated clothing, Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Eye/face protection Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side- shields. Skinprotection Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be warn at all times when handling chemical products if a risk assessment indicates this is necessary. Body protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involvod and should be approved by a specialist before handling this product, i Olher skin protection ; Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Respiratory protection Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Section 9. Physical and chemical properties Appearance - -- Physical state : Liquld, Color Clearwater white Odor None, Odor threshold Not available, p1-I 2,4 Melting point 0°C (32°F) Boiling point 100°C(212T) Flash point Not available. .... . ... ........ .......... ........................ ..... Evaporation rate Not available, Flammability (solid, gas) Not available. Lower and upper explosive Not available. (flammable) limits Vapor,pressure Not available. Vapor density Not available, Dale.of issue/safe of rovisfnn 7 f/15/2015- 4/8!