ARCHIVED REPORTS_XR0011773 - Laserfiche WebLink

Home Browse Search

2.0 GENERAL SAFETY REQUIREMENTS All persons involved in sub-surface investigations shall read and thoroughly understood this safety plan prior to entering and/or working on the site. No project personnel may be allowed on-site without the prior knowledge and consent to the designated site safety officer and project manager There will be no activities conducted on-site without sufficient backup personnel. At a minimum, two persons must be present during on-site activities Visual, voice, or radio communication will be maintained at all times There will be no eating, dnnlang, application of cosmetics or smolang on the site Project personnel shall bring to the attention of the designated site safety officer any unsafe condition or practice associated with on-site project related activities All boring, excavation, heavy equipment operation, and general construction activities shall be performed while in compliance with 29 CFR 1926 All project personnel who are likely to wear purifying or air supplied respirators must first meet the training and medical requirements of 29 CFR 1910 120 and 20 CFR 1910.134 No contact lenses may be warn within 20 feet of drilling activity ("hot zone") 2.1 DRILL RIG SAFETY GUIDELINES Drill ng maintenance and safety is the responsibility of the drilling operator The following information is provided as general guidelines for safe practices on the site. No food or beverage will be consumed or stored in the operational area. The route of travel before moving drill ng off-road should be inspected. Rocks, trees, erosion, and uneven surfaces should be noted No passengers shall be permitted in the cab while moving dull ng onto rough or sloped terrain Multiple drive power trains (when available) on ng vehicle shall be mobilized for off-road travel. . Travel directly up or down grade on slopes is preferred lacy 29 1"+ 4 msChwd Caval Mvd. Swakm CA I