Laserfiche WebLink
SWRCB , January 2002 Page of <br /> 11 . FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps X <br /> Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br /> Test Method Developed By : ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br /> ❑ Other (Spec) <br /> Test Method Used : ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br /> ❑ Other (Specify) <br /> Test Equipment Used : Equipment Resolution: <br /> Fill Sump # Fill Sump # Fill Sump # Fill Sump # <br /> Sump Diameter: <br /> Sump Depth : <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration : <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material : <br /> Wait time between applying <br /> water and starting test : <br /> Test Start Time : <br /> Initial Reading (RI) : <br /> Test End Time : <br /> Final Reading RF) : <br /> Test Duration : <br /> Change in Reading (RF-RI) : <br /> Pass/Fail Threshold or Criteria: <br /> Test Result : <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testing? <br /> Was sensor properly replaced and <br /> verified functional after testing? <br /> Comments — (include information on repairs made prior to testing, and recommended follotiv-up fof•failed tests) <br />