Laserfiche WebLink
ATCAssociates SHM SAnTY PLAN <br /> PERSONAL PROTECTIVE EQUIPMENT <br /> As a minimum Level D protection is required on all ATC worksites. Level D includes: <br /> ✓ Steel toed boots <br /> I/ Safety Glasses_ <br /> ✓ Hard Hat <br /> For each task on this project, identify additional protective garments as required, include the <br /> conditions under which the level of PPE would be modified for each task. <br /> Cnndit�on Personnel Garmerit(s ... <br /> Working Near Vehicle Orange Vests <br /> 1 >20 ppm for 5 minutes v2 Face Respirator <br /> 1 >200 ppm for 5 minutes Evacuate Site Full Face Respirator <br /> r< <br /> SITE CONTROL AND COMMUNICATIONS <br /> z , <br /> The buddy system must be used on all ATC hazardous waste sites. <br /> ill be secured as follows: Fencing will be used when possible. <br /> Site w g <br /> Work Zones will be marked as follows: Orange cones or barricades and caution tape will be <br /> used to!mark off work zone where traffic is present. <br /> MARK WORK ZONES ON SITE MAP L7CHECK WHEN DONE. <br /> PAGE 10 <br />