Laserfiche WebLink
} <br /> y t <br /> I <br /> Project No.034-98081 <br /> Page No. 1] <br /> I <br /> gloves under the butyl gloves will provide added protection and aid in a more <br /> ' effective decontaEnination process. <br /> } <br /> • Ear Protection: Based on anticipated on-site noise measurements, field personnel <br /> may be required by the task safety leader of ;safety officer to wear hearing l <br /> I <br /> protection devices (ear plugs) during drilling operations. <br /> a' <br /> • Eye Protection: Each field team member will wear a minimum of impact-resistant <br /> safety glasses with attached side shield. Where splashes of potentially hazardous <br /> liquid or flying particles are likely, chemical safety goggles will be required in <br /> place of safety glasses. <br /> Foot Protection: Field personnel will wear neoprene rubber boots with steel toes <br /> and shanks. Under non-liquid exposure conditions,']eather boots with steel toes and <br /> shanks are permissible. The boots will be taped to the leg of Tyvek®suits. 1 <br /> I <br /> At the discretion of the on-site Safety Task Leader, rubbergloves, Tyvek® coveralls and neoprene 6 <br /> boots may not be required if soil or water is not obviously contaminated, or if PID measurements of the <br /> split-spoon soil samples are below 500 ppmv. <br /> 5.2 Sample Collection <br /> i.� <br /> Personnel who may be exposed to contaminated samples and/or liquid splashes will be required to <br /> i <br /> wear the following equipment: <br /> • Respiratory Protection: All sampling personnel will be required to have available <br /> for use a properly fit tested half-mask air purifying respirator with organic vapor <br /> cartridges with particulate pre-filters. Respirators will be worn based on criteria I <br /> listed in Section 4.0. <br /> ` I <br /> • Body Protection: All sampling personnel will wear semi-permeable (white) <br /> Tyvek®coveralls when contact with contaminated soil or liquids is likely to occur. <br /> Company issued safety.helmets will be worn when overhead hazards exist. <br /> • Hand Protection: Butyl rubber or nitrile gloves w.if11 be worn over disposal latex or <br /> PVC gloves. <br /> • Eye Protection: Impact-resistant safety glasses with attached side shield must be <br /> worn during sampling activities. Where splashes may occur, chemical goggles <br /> must be worn. <br /> E <br /> • Foot Protection: Neoprene rubber boots with steel toes and shanks will be worn. <br /> I <br /> KRAZAN & ASSOCIATES,INC. <br /> Offices Serving the Western United States 4 <br /> w 1 <br />