COMPLIANCE INFO_2005 - 2009 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 15 of -7 7. UNDER-DISPENSER CONTAINMENT UDC TESTING Test Method Developed By: ❑UDC Manufacturer Wndustry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum NHydrostatic ❑Other(Spec) Test Equipment Used: 719-w7at Equipment Resolution: UDC# UDC# UDC# UDC# UDC Manufacturer: Bravo UDC Material: Fiberglass UDC Depth: 35" Height from UDC Bottom to Top 17" of Highest Piping Penetration: Height from UDC Bottom to None Lowest Electrical Penetration: Condition of UDC prior to New testing: Portion of UDC Tested Above penetrations Does turbine shut down when UDC sensor detects liquid(both 114 Yes ❑No ❑NA ❑Yes ❑No ' INA -1 Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?` Turbine shutdown response time Is system programmed for fail- 1KYes ❑No ❑NA ❑Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA safe shutdown?' Was fail-safe verified to be yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA operational?* Wait time between applying I hr. pressure/vacuum/water and starting test Test Start Time: 11:00 Initial Reading(Rj): At paint line Test End Time: 1:30 next day Final Reading(RF): At paint line Test Duration: >24 hrs. Change in Reading(RF-R,): None Pass/Fail Threshold or Criteria: Test Result: N.Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? XYes ❑No 11NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) New UDC was lake tested for 24 hrs. and inspected by CUPA Test water was placed into labeled drum on site UDC was tested above all penetrations 1 If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)