Laserfiche WebLink
SWRCB, January 2002 Page 1 of 1 <br /> 6. PIPING SUMP TESTING <br /> Test Method Developed By: r Sump Manufacturer r Industry Standard r Professional Engineer <br /> r Other(Specify) <br /> Test Method Used By: r Pressure r vacuum C: Hydrostatic <br /> r Other(Specify) <br /> Test Equipment Used: [VP.LT i Equipment Resolution: 1-0..00.0...0,1._n_._._ <br /> Sump# Sump# Sump# Sump# <br /> Sump Diameter: in. in. In. In. <br /> Sump Depth: In. in. In. In. <br /> Sump Material: <br /> Height from Tank Top to Top of Highest <br /> Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to testing: <br /> Portion of Sump Testedt <br /> Does turbine shut down when sump <br /> sensor detects liquid(both product and r Yes r Nor NA r Yes r No r NA r Yes r No r NA r Yes r Nor NA <br /> water)?* <br /> Turbine shutdown response time Sec sec SEC Sec <br /> Is system programmed for fall-safe <br /> shutdown?" r Yes r Nor NA r Yes r No r NA r Yes r No r NA r Yes r Nor NA <br /> Was fail-safe verified to be operational? r Yes r Nor NA r Yes r No r NA r Yes r Nor NA r Yes r Nor NA <br /> Wait time between applying <br /> pressure/vacuum/water and starting m i n m i n m i n m i n <br /> test <br /> Test Start Time: <br /> Initial Reading(Rt): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-Rt) <br /> Pass/Fail Threshold or Criteria: +/- <br /> Test Result: <br /> Was sensor removed for testing? r Yes r Nor NA r Yes r No r NA r Yes r Nor NA r Yes r Nor NA <br /> was sensor properly replaced and r YES r NO r NA r Yes r NO r NA r Yes r No NA r Yes r NO r NA <br /> verified functional after testing? <br /> Comments? (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> vent sump 24x30, 34",fiberglass, 10",10", good, 12" n/a, n/a, n/a, n/a, 5 min, 12:31, 0, 13:01, -0.0009, 30mins, -0.0009, +/- <br /> 0.0020, pass, yes, yes, (unable to test 87, 91, and diesel piping sumps, due to the fact of the sump boots are cracked and <br /> broken. <br /> 1 If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is <br /> ?NO? or ?NA?, the entire sump must be tested. <br />