Laserfiche WebLink
B) Gluing F-Series Electrical to Sump Wall <br /> 13.1) For F-1X-RR fitting models and your PVC-Coated ROBROYTm Brand Conduit, or your F-1X- <br /> SS fitting models and galvanized condit should be clean and COMPLETELY DRY AT ALL TIMES. <br /> All pre-abraded or milled areas should be inspected for debris and inconsistencies. No dirt, grit, <br /> water or other foreign material should be on or inside the fiberglass fitting components. <br /> E!M= i13 <br /> USE SMITH TM ADHESIVE # 7069 or 8069 <br /> or AMERONTM PSX-20 8oz ONLY <br /> B.2) Get one clamping tool ready for each Adhesive <br /> fitting installation. Fig. B4 <br /> B.3) Follow your adhesive <br /> manufacturer Instructions to mix and <br /> apply your adhesive. One bag of provided <br /> fiberglass filler is to be fully mixed with each <br /> adhesive kit. (Pg. 4) <br /> DO NOT ATTEMPT TO MIX MORE <br /> THAN ONE KIT AT A TIME. <br /> B.4) Main body first - carefully apply a <br /> generous amount of adhesive to the wall and the <br /> face that will meet the wall (Fig. 134). <br /> ■� �"20187 <br /> GENEROUSLY APPLY ADHESIVE TO THE`JAN <br /> FACE OF THE FLANGE AND 1111RONMENTAL HEALTH OUTSIDE <br /> CHANNEL ON THE INSIDE DEPARTMENT <br /> 7 ji Generously apply mixed <br /> adhesive to the flange j <br /> 6 ii-F-Series-1 X-SS-11 A <br />