COMPLIANCE INFO_2013 - 2018 - Laserfiche WebLink

Home Browse Search

R F.CEIVEL) igGfrrtER-RYAN &c. JUN 0 2 2015 GR Job# 20-630774.1 SWRCB,January 2002 ENVIRONMENTAL Page 2 of 3 6.PIPING`0ffV` &RE"' Test Method Developed By: Tank Manufacturer Industry Standard Professional Engineer Other(specify) Test Method Used: Pressure Vacuum Hydrostatic Other(specify) Test Equipment Used: Incon Equipment Resolution: 0.0001 Sump# Fent Sum # Sum # sump# Sump Diameter: 24" Sump Depth: .111, Sump Material: Fiberglass Height from Tank Top to Top of 10" Highest Piping Penetration: Height from Tank Top to Lowest 14" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested(t) Above Penetration Does turbine shut down when sump sensor detects liquid(both Yes I' Q NA Yes No NA Yes No NA Yes No NA product and water)?* Turbine shutdown response time N/A Is system programmed for fail-safe Yes , ' NA Yes No NA Yes No NA Yes No NA shutdown?* Was fail-safe verified to be Yes NA Yes No NA Yes No NA Yes No NA operational?* Wait time between applying pressure/vacuum/water and starting 10ruin test: Test Start Time: 11:20 Initial Reading(Ri): 4.8340 Test End Time: 11:35 Final Reading(Rf) 4.8345 Test duration: 15min Chane in Reading(Rf-Ri): 0.0005 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Results: X Pass Fail Pass Fail Pass Fail Pass Fail Was sensor removed for testing? No NA Yes No NA Yes No NA Yes No NA Was sensor properly replaced and verified functional after testing? gy. i No NA Yes No NA Yes No NA Yes No NA Comments-(include information on repairs made prior to testing,and recommend follow-up for failed tests) (1)If the entire depth of the sump is not tested,specify how much was tested. If the answer to gay of the questions indicated with an asterisk(+)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)